blu Pro Vape Kit

Filling the clearomiser Hold your clearomiser upside down and unscrew the silver base from the black shell. Place the nozzle on the blu E-Liquid bottle against the inside wall of the clearomiser. Squeezing the bottle gently, pour the E-Liquid down the inside while avoiding the centre tube. Do Not fill past the tube. Re-assemble your Pro Tank... You're good to go. Priming the Pro Tank Before you start using your Pro Tank, you should prime the clearomiser. Without turning it on (do not push the button), take a couple of quick, short puffs and then blow softly into the mouthpiece. No vapour will be produced, this will help getting your E-Liquid on your quick to avoid getting a burnt taste. Using the Pro Tank Your battery will arrive partially charged so that you can get going straight away. To turn it on, just push the button 5 times in quick succession. The lights will flash 3 times to show it's switched on. Push and hold the button every time you want to vape. To turn if off, just push the button 5 times again. You know it's off as no light will come on when you push the button. Charging the Tank You know it needs to be charged if the button flashed red when you press it. Make sure to hold your Pro Tank upside down and remove the clearomiser. Screw the battery into the safe charge USB cable that come with Pro Kit. Only use this charger with a Pro Battery. Plug the cable into the blu Mains Adaptor (sold separately) or USB port. The lights on the battery will flash 3 times and will stay lit as charging is in progress. Charging can take around 3 hours from the mains. When fully charged the lights will flash 20 times before turning off